Shijiazhuang Naipu Pump Co., Ltd.
$1200≥1Piece/Pieces
| Zahlungsart: | L/C,T/T,Paypal,Money Gram,Western Union |
| Incoterm: | FOB,CFR,CIF,EXW,FAS,FCA,CPT,CIP,Express Delivery |
| Minimum der Bestellmenge: | 1 Set/Sets |
| Transport: | Ocean,Land,Air,Express,Express |
| Hafen: | Tianjin,Qingdao,Guangzhou |
Modell: FH4083
Marke: Naipu
| Verkaufseinheiten | : | Set/Sets |
| Pakettyp | : | Holzkiste |
| Bildbeispiel | : |
|
The file is encrypted. Please fill in the following information to continue accessing it
Hauptteile der Schlammpumpe: Laufrad, Spiralbuchse, Gehäuse, ThroatBush, Rahmenplattenbuchseneinsatz, Abdeckplatte, Rahmenplatte, Pumpenbuchsen-Expeller, Expeller-Ring, Stopfbuchse, Expeller, Pumpenwelle, Wellenhülse, Wellenabstandshalter, Lagerbaugruppe, Basis , Stopfbuchse, Stopfbuchspackung, Lagergehäuse, Laternenring, Pumpenauslassrohr, Flansch und so weiter.
HH Güllepumpe Throatbush / Güllepumpe A05 Liner
| Throatbush Code | HA Slurry Pump | Materials |
| E4083 | 6/4D, 6/4E | High chrome, Natural rubber, Polyurethane |
| F6083 | 8/6E, 8/6F | High chrome, Natural rubber, Polyurethane |
| G8083 | 10/8F, 10/8ST | High chrome, Natural rubber, Polyurethane |
| G10083 | 12/10ST | High chrome, Natural rubber, Polyurethane |
| G12083 | 14/12ST | High chrome, Natural rubber, Polyurethane |
| H14083 | 16/14TU | High chrome, Natural rubber, Polyurethane |
| Throatbush Code | HH Slurry Pump | Materials |
| DH2083 | 3/2D-HH | High chrome, Polyurethane |
| DH3083 | 4/3E-HH | High chrome, Polyurethane |
| FH4083 | 6/4F-HH | High chrome, Polyurethane |
| Throatbush Code | G(H) Gravel Pump | Materials |
| GG1412013-1 | 12/10G-G | High chrome |
| GGH10013 | 12/10G-GH | High chrome |
| FGH8013 | 10/8S-GH | High chrome |
| HG14130M | 16/14TU-GH | High chrome |
Metall Material
| Code | Material # |
Hardness HRC |
Performance | Application |
| A05 | KmTBCr26 | ≥56 | Ranks second only to A07 in abrasion-resistant performance; fair corrosion-resistant performance. | High impact load abrasion condition; PH rate ranging from 5 to 12 |
| A07 | KmTBCr15Mo3 | ≥59 | Best abrasion-resistant performance; corrosion-resistant performance is inferior to A05 | High impact load abrasion condition |
| A33 | ≥35 | Abrasion-resistant performance is close to A03; fair corrosion-resistant performance | Oxide slurry with PH rate no less than 1, like phosphor-gypsum in phosphate fertilizer plant, nitric acid, sulph-oacid and phosphoric acid, etc. | |
| A49 | ≥43 | Fair abrasion-resistant performance, close to A03; fair corrosion-resistant performance in media with lower PH rate. | Corrosion conditions with low PH rate, especially for flue gas and FGD devices for media of PH≥4; general suitable for lower acid condition. | |
| A12 | ≥62 | Higher abrasion-resistant performance than A05; fair corrosion-resistant performance; suitable for media with PH rate is 6-16, where A05 is not suitable. | High abrasive slurry with fine particles. | |
| A61 | 63-68 | Optimized abrasion-resistant performance than A12 | High abrasive slurry with fine particles. |
Horizontale Schlammpumpe mit Gummi- und Metallauskleidung. Hochwertige Schlammpumpe, OEM-Schlammkreiselpumpen, Schlammpumpen-Spirallaufbuchse E4110EP, Hastelloy-Pumpenteile, verschleißfeste Polyurethanteile, OEM A05 hochverchromte Laufräder.
Naipu Hauptpumpenmodell:
| NAH series | L(R) ,M | HH | SP(R) | G | AF Series |
| 1.5/1B-NAH(R) | 20A-L | 1.5/1 C-HH | 40PV-SP(R) | 6/4D-G | 2QV-AF |
| 2/1.5B-NAH(R) | 50B-L(R) | 3/2D-HH | 65QV-SP(R) | 8/6E-G | 3QV-AF |
| 3/2C-NAH(R) | 75C-L | 4/3E-HH | 100RV-SP(R) | 10/8F-G | 6SV-AF |
| 4/3C-NAH(R) | 100 D-L | 4/3X-HH | 150SV-SP(R) | 10/8S-G | 8SV-AF |
| 6/4D-NAH(R) | 150E-L | 6/4F-HH | 200SV-SP | 12/10G-G | 2AHF |
| 6/4E-NAH(R) | 300S-L | 6/4X-HH | 250TV-SP | 14/12G-G | 3AHF |
| 8/6E-NAH(R) | 10/8 R-M | 6S-H |
|
14/12T-G | 4AHF |
| 8/6R-NAH(R) | 10/8 E-M | 8/6S-H |
|
16/14 G-G | 6AHF |
| 10/8F-NAH(R) | 12/10F-M | 8/6X-H |
|
16/14TU-GH |
|
| 10/8X-NAH(R) |
|
6S-HP |
|
16/14H-GH |
|
| 12/10ST-NAH(R) |
|
8/6S-HP |
|
18/16G-G |
|
| 14/12ST-NAH(R) |
|
8/6X-HP |
|
18/16 TU-GH |
|
| 16/14TU-NAH(R) |
|
|
|
|
|
| 20/18G(TU)-NAH(R) |
|
|
|
|
+8615028111051
Haftungsausschluss: Warman, Goulds und Metso und andere sind die Markennamen der angesehenen Eigentümer. Jegliche Verwendung von Namen, Marken, Modellnummern oder Teilenummern von Wettbewerbern durch NaiPu Pump dient nur zu Referenzzwecken und bedeutet nicht, dass die aufgeführten Teile oder Pumpen das Produkt von Weir Warman Pumps, ITT Goulds Pumps und Metso Pumps sind.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now